Kontakt
Kako kupovati
Dostava
Savjetnik za kupnju
Characterizing Defects In Metals Using PALS
Characterizing Defects in Steel, Aluminum and Copper by way of Positron Annihilation Lifetime Spectroscopy
Engleski
115 b
Do 30 dana za povrat
Kupci su kupili i
/
Meki uvez
87.22
€
Machines with moving parts develop wear and tear after some time of operation. Sometimes defects are on the surface, and thus are visible with the naked eye or with a microscope. However, some defects are seated below the surface and are unnoticeable by the human eye or by a microscope. One way of probing materials for these defects is by way of Positron Annihilation Lifetime Spectroscopy (PALS). This sensitive technique was applied to characterize atomic-scale defects in aluminum and copper samples, as well as steel bearing raceways of different levels of usage. Measurements on aluminum and copper were performed before and after annealing near the melting point. Results show that average positron lifetime decreases significantly after annealing. Then steel bearing raceways were subjected to PALS measurements before and after mechanical testing. Results show an average increase in the positron lifetime of tested bearings as compared to the as-fabricated bearing.
Informacije o knjizi
Engleski
Poklonite ovu knjigu još danas
To je jednostavno
1 Dodajte knjigu u košaricu i odaberite isporuku kao poklon 2 Zauzvrat ćemo vam poslati kupon 3 Knjiga dolazi na adresu poklonoprimcaMoglo bi vas zanimati i
/
Meki uvez
13.15
€
/
Meki uvez
12.44
€
/
Tvrdi uvez
182.45
€
/
Meki uvez
9.60
€
Dobar dan! Ja sam Libroamiko, vaš književni savjetnik.
Kako vam mogu pomoći?