Kontakt
Kako kupovati
Dostava
Savjetnik za kupnju
Modeling Adhesive Joints by Cohesive Models Using the Direct Method
Engleski
121 b
Do 30 dana za povrat
Kupci su kupili i
/
Meki uvez
35.76
€
/
Meki uvez
58.87
€
/
Meki uvez
53.50
€
/
Meki uvez
8.20
€
The industry s growing interest in adhesive bonds is based on the increased reliability of the strength prediction methods to adhesive structures. This work aims the validation of tensile and shear cohesive laws, estimated by the application of the direct method, in order to predict the failure of bonded joints under mixed-mode loading. In this context, single and double-lap joints were tested with different overlap lengths and adhesives with distinct ductility. The cohesive laws in pure modes enabled obtaining simplified cohesive laws with triangular, trapezoidal and linear-exponential shapes, which were tested for each one of the adhesives. The validation of the referred cohesive law shapes was accomplished by comparing the numerical predictions with the experimental tests. A peel and shear stress analysis in the adhesive was also performed, in order to understand the influence of stresses on the joints' strength. The use of the direct method allowed obtaining accurate strength predictions, providing the most adequate cohesive law shape for each set of adhesive/joint geometry.
Informacije o knjizi
Engleski
Poklonite ovu knjigu još danas
To je jednostavno
1 Dodajte knjigu u košaricu i odaberite isporuku kao poklon 2 Zauzvrat ćemo vam poslati kupon 3 Knjiga dolazi na adresu poklonoprimcaMoglo bi vas zanimati i
/
Meki uvez
13.98
€
/
Meki uvez
6.37
€
/
Tvrdi uvez
34.55
€
/
Meki uvez
21.17
€
/
Tvrdi uvez
44.18
€
/
Tvrdi uvez
25.12
€
