Kontakt
Kako kupovati
Dostava
Savjetnik za kupnju
Optimization of a Multilayer Photothermal Sensor for Infrared Spectroscopy
Engleski
40 b
Do 30 dana za povrat
Kupci su kupili i
/
Meki uvez
48.34
€
/
Meki uvez
29.54
€
/
Meki uvez
37.08
€
/
Meki uvez
52.36
€
Mathematical modeling and atomic force microscopy were used to optimize a multi-layer reed sensor for use in a new infrared detection system. The reed sensor is designed to deflect in response to temperature variations. In this system, a sample absorbs infrared light (modulated at some frequency to reduce noise) and releases heat into the reed. The layers expand differently, causing the reed to deflect. The deflection is influenced by geometric parameters, such as length and thickness of each layer, and also by the frequency of modulation. Deflection is easily measured using an atomic force microscope. This research applied a mathematical model to the reed sensor, explored the effect of varying geometric parameters, and used experimental testing to evaluate the model. Several reeds were tested to validate the model, which predicted sensitivity, maximum deflection, resonance frequency, and signal to noise ratio. Varying concentrations of absorbing chemical were deposited in the reed, to cause a change in deflection. A cantilever reed having three layers was modeled mathematically using a recently developed thermal model and a mechanical model based on two-layer theory.
Informacije o knjizi
Engleski
Kategorija
Poklonite ovu knjigu još danas
To je jednostavno
1 Dodajte knjigu u košaricu i odaberite isporuku kao poklon 2 Zauzvrat ćemo vam poslati kupon 3 Knjiga dolazi na adresu poklonoprimcaMoglo bi vas zanimati i
/
Tvrdi uvez
139.40
€
/
Meki uvez
27.23
€
/
Meki uvez
20.09
€
/
Meki uvez
26.12
€
/
Meki uvez
23.61
€
Dobar dan! Ja sam Libroamiko, vaš književni savjetnik.
Kako vam mogu pomoći?